Online Service
      Scan it
      Support hotline
      18681482740
      Service Hotline:
      18681482740
      中文  |   English
      Industry knowledge
      Contact

      Address: Floor 1, Building 2, Quanshengchang Industrial Park, Buyong Shajing Road, Shajing Street, Shenzhen

      Contact: Mr. Li 18681482740

      Email: lilinhan1314@126.com

      Website: www.egx6.com

      Industry knowledge
      Common Failure Causes and Application Methods of Contact Fragments
      06-07 / 2024

      The service life of contact fragments is generally relatively long, with some contact fragments having a maximum lifespan of up to 1 million times. So what are the common reasons for contact fragment failure? Let me share with you below


      The common failure conditions of contacting shrapnel are as follows:


      Overtravel: For example, if you press the shrapnel by hand, the stroke is uncontrollable and it is likely to cause overtravel and damage the shrapnel.


      Overpressure: For example, if you press the shrapnel by hand, the pressure is uncontrollable, and the load may exceed the normal preset pressure value of the shrapnel, which may lead to overtravel and damage to the shrapnel.


      Excessive crushing: Use sharp objects or nails to form bullet scratches.


      Contact too large: The design of the contact is unreasonable, resulting in the contact not being used well in conjunction with the shrapnel, which affects the normal use of the shrapnel.


      Uneven contact surface of shrapnel: The surrounding area where shrapnel is placed is uneven.


      Poor contact: Reasonably install the shrapnel and pay attention to leaving space for the shrapnel.


      Resistance value: The resistance value of the shrapnel is relatively fixed, such as less than 100 ohms for stainless steel, less than 1 ohm for nickel plating, and less than 0.1 ohms for gold plating.


      When using contact fragments, pay attention to reasonable use and refer to the following methods:


      Contact with shrapnel: The size of the contact must be used in conjunction with the shrapnel, or the size of the contact must be matched with the shrapnel to prevent excessive crushing of the shrapnel.


      Overpressure: All fragments have a preset positive pressure value, and excessive pressure can lead to fragment damage.


      Overtravel: Most of the fragments are designed based on flat surfaces, and special models are designed according to customer requests. The contact point can be lower than the placement surface.


      The above is the reason for the common failure of contact fragments, hoping to be helpful to everyone. If you need customized contact fragments, please feel free to contact us.


      Links:Zibo CNC machine tool automatic car washing machine Qingdao refrigeration equipment grinder equipment steel grit fire inspection cabinet sweeper motor desulfurization denitrification equipment drawing mold washing machine automatic soldering machine server repair HART475 hand operator dust-free cloth dust-free paper stack screw type Sludge dehydration machine, precision repair welding machine, Shandong motor repair, rotary hot pot equipment, integrated ultrasonic cleaning machine, Zhongjie radial drilling machine, beer equipment, Shenzhen brass manufacturer, welcome lamp, lens digging, drilling rig, aluminum housing manufacturer, automatic dispensing machine, automatic screwing machine neodymium Iron boron magnet 4g router wireless bridge
      We provide you with high quality products
      主站蜘蛛池模板: 琼结县| 文昌市| 砀山县| 金溪县| 四平市| 五峰| 扬州市| 龙江县| 大丰市| 城固县| 营山县| 富裕县| 镇江市| 黑水县| 兰西县| 卓资县| 大邑县| 尉犁县| 崇明县| 碌曲县| 北票市| 长乐市| 浮梁县| 禹城市| 滁州市| 南投市| 河东区| 临颍县| 广德县| 华阴市| 巴塘县| 财经| 城步| 阿荣旗| 耒阳市| 墨竹工卡县| 改则县| 固始县| 招远市| 宣化县| 商洛市|